Model

Image/Illustration

Overview

FMD-6

 Force Measurement Indicator

 - Mains powered panel mounted Force Measurement indicator (optional 24 VDC)
 - 16 bit resolution with better than 0.005% linearity. Load cell excitation 10 VDC
 - 250 samples per second with digital calibration and up to 4 linearisation points
 - Max./Min./Peak/Track and hold functions
 - RS232 interface and optional 16 bit DAC generated 4-20mA or 0-10V output
 - 2 programable power FET solid state relays outputs
 - Electrical inputs on rear to remotely operate or lock front panel buttons
 - PC software program with graphical presentation
 - Robust aluminium housing
 

MI4000

 Digital Weight Indicator

 - Mains powered panel mounted weight indicator (optional low voltage versions)
 - 4.5 digit 10mm high LED display 10 updates/sec max reading ± 19999 counts
 - Optional RS232, RS485 or current loop communication interfaces
 - Optional analogue output (voltage or current)
 - Optional relay setpoints (up to 16 setpoints (SP16) with REM8 or REM16 )
 - Optional DIN rail mounting
 - Robust plastic enclosure

MINIMATE

 Programable Digital Weight Controller

 - Panel mounted mains powered programable weight controller
 - 16 bit resolution with better than 0.01% linearity. Load cell excitation 10 VDC
 - 250 samples per second with digital calibration
 - Programable via a PC (Pi Program provided) with touch screen control
 - Select up to 256 recipes. Use up to 32 different programs
 - Print your results. 4 communication ports with several protocols
 - Optional analogue output (0-10V DC or 4-20mA)
 - Optional Profibus DP interface
 - Can be provided with  8 inputs/8 outputs or 8 inputs/4 outputs & 1 analogue op.
 - Robust aluminium housing
 

MW-LE

 Battery powered Digital Weight Indicator

 - Approved to OIML 4000d, 1 d = 1uV. Multi-range or Multi-interval
 - 50 samples per second, 24 bit ADC
 - Ideal for mobile weighing applications 12/24 VDC supply
 - Piece counting and preset tare functions
 - Digital inputs and outputs for full control
 - RS232 and RS422 interfaces for printer or PLC/PC
 - Drives 1 - 6  load cells, 350 Ohms each
 - Robust Aluminium housing, panel mount
 - LCD display version also available
 

NPR

Digital Weight Indicator

 - Low cost panel mounted Industrial Weight Indicator
 - 50 samples per second
 - Ideal for scales and static weighing applications
 - Gross, Tare and Net functions
 - Adjustable input sensitivity from 0.5mV/V to 3.5mV/V
 - 6 inputs for remote measurement control
 - 2 setpoints with solid state relay outputs
 - RS232 and RS422 interfaces
 - Robust Aluminium housing
 - Optional analogue output 4-20mA or 0-10V
 

QMA

Fast Digital Load Weight Indicator

 - Approved to OIML 6000d (1uV = 1d)
 - Drives up to 4 off 350 Ohm load cells, 1000 samples per second
 - Ideal for high precision filling and dosing applications
 - 4 setpoints with solid state relay outputs (up to 8 maximum)
 - Gross, Tare and Net functions, RS232 and RS422 interfaces
 - Optional DAC generated 16 bit Analogue Output
 - Optional Profibus DP interface
 - 8 external key pad inputs for remote control
 - Robust Aluminium housing, panel mounted
 

SAI-CK

Checkweigher Indicator/Controller

 - Designed for use with in-line checkweighers
 - 250 samples per second
 - Approved by NMI to 4000d :Certificate TC2636
 - Too high, too low and pass judgements in milliseconds
 - Solid state relay outputs for too high and too low
 - Photocell input for Start weighing sequence
 - RS232 interface with optional print facility
 - LED display with bargraph
 - Panel mounted aluminium housing
 

SAI-MV

Filling Indicator/Controller

 - Approved to 4000d NMI, 250 samples per second 16 bit ADC
 - Ideal for filling and dosing applications
 - 2 solid state relay outputs for coarse and fine filling
 - In-flight correction, automatic or manual
 - Gross or net filling (auto tare on Start filling
 - 5 logic inputs which includes Start and Stop filling
 - RS232 interface with ASCII protocol for PC communication
 - Optional RS422 interface for multi-drop bus
 - Optional Printer Version (PR) with built-in printer protocol
 - Robust panel mounted aluminium housing
 

SMART

Fast Programable Digital Weight Indicator 

 - Panel mounted mains powered programable weight controller
 - 20 bit resolution with better than 0.0015% linearity. Load cell excitation 10 VDC
 - 1000 samples per second with digital calibration
 - Programable via a PC (Pi Program provided) with optional touch screen control
 - Select up to 256 recipes. Use up to 32 different programs
 - Print your results. 4 communication ports with several protocols
 - Optional analogue output (0-10V DC or 4-20mA)
 - Optional Profibus DP interface
 - Can be provided with  8 inputs/8 outputs or 8 inputs/4 outputs & 1 analogue output
 - Robust aluminium housing
 - Can be programmed as a Filler, Checkweigher, Loss-in-weight or a belt weigher controller